RSIC-S1-CRC Double Deflection Spring Isolator
[PAC-S1-CRC]

The RSIC-SI-CRC Double Deflection Spring Isolator is designed to isolate the ceiling consisting of 1.5" x 16 galvanized cold rolled channel and furring channel, (25 or 20 Gauge). The RSIC-SI-CRC clip is available in 10 lb, 20 lb, 40 lb, 80 lb, 120 lb and 160 lb versions. The 80 lb, 120 lb and 160 lb isolators allow for spacing at 48" x 48" oc supporting 2, 3 or 4 layers of 5/8" gypsum board. The lighter weight springs (5 lb ~ 40 lb) may be used for single layer ceilings, edge or corner isolation. The RSICSI- CRC clips unique universal mounting system allows it to be mounted to wood and steel framed systems. The RSIC-SI-CRC isolator can also be mounted to concrete with the addition of the RSICSI Overhead adapter.

SPECIFICATIONS:

  • Acoustical Design Load: 5 Lb to 160Lb
  • Total Deflection:: 1 Inch
  • Double Deflection: Yes
  • Pre-Calibrated: Yes
  • Pre-Assembled: Yes
  • Adjustable: Yes
  • Cavity Min: 1" (Wood)
  • Cavity Max: 9"
  • Adjustment Limit: 6"
  • Use On Ceilings: Yes
  • Use On Walls: No
  • New Construction: Yes
  • Retro Fit: Yes

BENEFITS:

  • RSIC-SI-CRC reduces vibrations as low as 5 hz.
  • Rubber bushings dampen the spring for highest acoustical performance.
  • Reduced labor expense with fully assembled and pre-calibrated isolators.
  • RSIC-SI-CRC is engineered for full 1" spring deflection.

 

Download Data Sheet DOWNLOAD DATA SHEET

Download Data Sheet DOWNLOAD PRODUCT FLIER

Download Data Sheet DOWNLOAD CLIP MEASUREMENTS

Download Data Sheet DOWNLOAD PRODUCT FLIER

$35.95

Available Options:

Load Rating: